A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. We dispatch Clovis units carrying industrial extraction pumps, air movers, and commercial dehumidifiers already loaded on the truck.
Hirex Water Damage started because homeowners in Clovis, CA kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Clovis roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our crew leads carry IICRC water restoration certifications and have logged real hours on Category 1, 2, and 3 losses, so Emergency Water Damage in Clovis isn't a side service we tacked on — it's the reason the company exists. We carry full general liability coverage and are licensed to operate throughout Clovis, CA, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Clovis, CA so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Ask any Clovis property manager who has dealt with a burst supply line at 3am — the difference between a crew that shows up ready and one still loading a truck at the shop is measured in gallons of water soaking into your subfloor. That's the gap Hirex Water Damage was built to close, one Clovis call at a time.
The most expensive Clovis restoration jobs we run almost never started as a dramatic flood; they started as something small that got put off. Here's what tells us a property needs professional attention rather than a mop and a fan:
If you're nodding along to any of these, get ahead of it now rather than later — our Clovis dispatcher will give you an honest read on urgency, not a sales pitch.
We size the Clovis response to the actual damage — a single-room extraction gets a two-person crew, a commercial loss gets the full fleet — nothing gets a cookie-cutter response.
Our Clovis units run truck-mount extraction pumps that pull thousands of gallons per hour, cutting standing-water time from days to hours. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
We place industrial dehumidifiers and air movers based on actual psychrometric calculations, not a standard equipment count per room, with daily drying logs so you can see the numbers improving, not just take our word for it.
For families in Clovis, this covers flood-cut drywall removal, subfloor evaluation, and packing out salvageable belongings for cleaning, with clear photo documentation at every stage for your insurance claim.
Multi-unit and commercial Clovis properties get their own project manager plus enough drying equipment to cover the real square footage, not a token setup — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Category 3 blackwater calls for full PPE, antimicrobial treatment, and disposal of anything porous that touched the contamination — our Clovis crews are trained for exactly that protocol.
Every Clovis job includes a preventive antimicrobial application, and if we spot conditions that need full remediation we tell you plainly instead of quietly hoping it clears up.
Every Clovis estimate is written and explained before work begins — no vague "we'll see how it goes" pricing.
Because our equipment cache sits inside Clovis, CA, most Clovis calls see a technician on-site in under 60 minutes.
We photograph and log every step specifically so your claim moves faster and you're not the one arguing with the insurance company.
If moisture readings aren't where they should be at the end of the job, we come back and keep drying at no extra charge.
Our Clovis team asks a handful of targeted questions so the truck that shows up already has the right gear loaded.
A licensed technician heads to your Clovis address with extraction and drying equipment already loaded.
Extraction happens immediately, followed by a moisture survey that tells us precisely where the drying equipment needs to go.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.
Every Clovis job gets closed based on instrument readings, not a visual check, and we won't call it finished until the numbers say it's finished. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
That's not a marketing line — it's written into every Clovis work order we issue. If a second visit is ever needed, it comes from the same crew that handled the original job whenever scheduling allows, since they already know the property and the readings we started from.
"Our water heater let go at midnight and a Hirex Water Damage tech was pulling water out of the hallway by 1am. Fast doesn't begin to cover it." — Danielle R.
"I didn't touch the claim paperwork once. They sent it straight to the adjuster with photos and moisture logs attached." — Marcus T.
"They showed me the daily moisture readings so I wasn't just trusting a stranger's word that the house was dry." — Priya S.
"A supply line failure flooded our kitchen and this crew had us reopened in under a week — much faster than we expected." — Aaron W.
"Sewage backup is not a fun call to make, but the crew treated it professionally and explained the whole containment process." — Lena G.
"What they quoted up front is what I paid. No hidden equipment fees." — Sam O.
Most Clovis dispatches are on-site within 60-90 minutes since our crews and equipment are based in-state, not flown or trucked in from elsewhere.
We always quote first. You'll see a written estimate for the Clovis job before any drying equipment starts running.
Our Clovis on-call rotation covers water extraction, drying, and blackwater cleanup any hour of the day or night.
Direct adjuster communication is standard — we send photo and moisture documentation formatted for a Clovis insurance claim.
We take moisture meter readings on affected materials and compare them against the dry standard for that material type — a visual check alone isn't enough.
Blackwater and sewage response is a core part of what our Clovis team does, not a job we sub out.
Cut power to the affected area if there's standing water near outlets, and avoid walking through it until our Clovis tech confirms it's safe.
Yes, we regularly respond to commercial and multi-unit losses in Clovis, including retail, restaurants, and office space.
Typical drying time runs 3-5 days for a Clovis home, though a job that sat unaddressed longer can take longer to fully dry.
Not if it's addressed quickly — mold generally needs 24-48 hours of sustained moisture, which is exactly why fast extraction matters.
Yes, if moisture readings aren't at dry standard when we finish, or a callback shows lingering moisture within 30 days, we return at no extra charge.
Our Clovis coverage extends through the zip codes shown here and into nearby Clovis, CA communities.
Our Clovis dispatch covers the full city plus a wide radius of surrounding zip codes, backed by additional crews staged throughout Clovis, CA for larger losses. If your address falls inside or near Clovis, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Clovis, Clovis, CAReach our Clovis line directly and get a technician on the way today.
Call +1-844-234-5373