A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. Hirex Water Damage sends licensed technicians straight to your Clovis address with extraction equipment already loaded and running.
Hirex Water Damage started because homeowners in Clovis, CA kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Clovis roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our senior technicians are IICRC-certified and have worked everything from a clean supply-line break to a full sewage backup, so Water Damage Repair in Clovis isn't a side service we tacked on — it's the reason the company exists. We carry full general liability coverage and are licensed to operate throughout Clovis, CA, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Clovis, CA so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Anyone in Clovis who has had a supply line fail overnight knows the real cost isn't the leak itself, it's how long the standing water sits before someone with the right equipment arrives. That's the gap Hirex Water Damage was built to close, one Clovis call at a time.
Water damage doesn't always look dramatic at first — some of the costliest Clovis jobs we've handled began as a small, easy-to-miss problem. Here's what tells us a property needs professional attention rather than a mop and a fan:
If you're nodding along to any of these, get ahead of it now rather than later — our Clovis dispatcher will give you an honest read on urgency, not a sales pitch.
Whether it's one bedroom carpet or an entire flooded commercial floor, our Clovis crews scale the response to match the loss — nothing gets a cookie-cutter response.
Our Clovis units run truck-mount extraction pumps that pull thousands of gallons per hour, cutting standing-water time from days to hours. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Once water is out, we bring in commercial air movers and LGR dehumidifiers, positioned using psychrometric readings rather than guesswork, with daily drying logs so you can see the numbers improving, not just take our word for it.
For Clovis homeowners, that means drywall removal at the flood cut line, subfloor assessment, and content pack-out for anything that can be saved, with clear photo documentation at every stage for your insurance claim.
Clovis businesses and property managers get a dedicated project lead, after-hours crews, and equipment scaled to square footage rather than a single-crew response — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Category 3 blackwater calls for full PPE, antimicrobial treatment, and disposal of anything porous that touched the contamination — our Clovis crews are trained for exactly that protocol.
We apply antimicrobial treatment during every Clovis drying job specifically to head off mold before it starts, and we'll flag any area that needs deeper remediation.
We quote the job before equipment gets plugged in, so there's no surprise line item buried in the final invoice.
Because our equipment cache sits inside Clovis, CA, most Clovis calls see a technician on-site in under 60 minutes.
We document everything with photos and moisture logs and work directly with your adjuster so you're not stuck translating restoration jargon.
Final moisture readings have to hit dry-standard before we consider a Clovis job done, and getting there again is on us, not you.
A short call with our Clovis dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
A licensed technician heads to your Clovis address with extraction and drying equipment already loaded.
Standing water comes out first; drying equipment gets placed only after we've mapped exactly where moisture is hiding.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.
Our Clovis technicians use moisture meters at the start and the end of every job, and the final number has to hit the dry standard before we leave. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
We put that guarantee directly on the Clovis work order, not just in an ad. If a second visit is ever needed, it comes from the same crew that handled the original job whenever scheduling allows, since they already know the property and the readings we started from.
"We had standing water from a burst water heater and the technician showed up before I even finished mopping the entry way." — Danielle R.
"I didn't touch the claim paperwork once. They sent it straight to the adjuster with photos and moisture logs attached." — Marcus T.
"They showed me the daily moisture readings so I wasn't just trusting a stranger's word that the house was dry." — Priya S.
"Our restaurant flooded from a line break in the kitchen and they had us back open in three days flat." — Aaron W.
"Sewage backup is not a fun call to make, but the crew treated it professionally and explained the whole containment process." — Lena G.
"The quote matched the final invoice exactly. No surprise charges tacked on at the end." — Sam O.
Because our equipment is staged inside Clovis, CA, most Clovis calls see a technician on-site within 60 to 90 minutes of the initial call.
Yes — every Clovis job gets a written estimate before equipment is turned on, and we walk through it with you line by line.
Around-the-clock coverage in Clovis includes extraction, drying, and Category 3 sewage response — nothing on that list waits for morning.
Direct adjuster communication is standard — we send photo and moisture documentation formatted for a Clovis insurance claim.
We rely on moisture meters and psychrometric readings, not a guess, before signing off on a Clovis job as complete.
We regularly handle sewage backups in Clovis using full containment, PPE, and EPA-registered antimicrobial products.
Cut power to the affected area if there's standing water near outlets, and avoid walking through it until our Clovis tech confirms it's safe.
We scale crews and equipment for commercial Clovis accounts and assign a dedicated project lead for anything beyond a single unit.
Drying time varies with material and how quickly extraction started, but 3 to 5 days is typical for most Clovis jobs.
Mold isn't inevitable, but the window to prevent it is narrow, which is why we treat speed as part of the Clovis service, not an upsell.
Yes, if moisture readings aren't at dry standard when we finish, or a callback shows lingering moisture within 30 days, we return at no extra charge.
See the zip codes and nearby cities listed below — our Clovis crews cover that full radius.
Our Clovis dispatch covers the full city plus a wide radius of surrounding zip codes, backed by additional crews staged throughout Clovis, CA for larger losses. If your address falls inside or near Clovis, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Clovis, Clovis, CAReach our Clovis line directly and get a technician on the way today.
Call +1-844-578-1604